Fire Alarm System Installation in London & Surrounding Areas
Fire alarm systems play a critical role in protecting lives and property. A correctly designed and installed system provides early warning in the event of a fire, allowing occupants to evacuate safely and reducing the risk of serious damage.
We provide professional fire alarm system installation across London and surrounding areas, for both residential and commercial properties. All systems are installed in line with current UK standards and best practice.
About the service
A fire alarm system detects smoke or heat and alerts occupants through audible and visual warnings. The type of system required depends on the building, its layout, and how it is used.
We design and install fire alarm systems in line with BS 5839 (Fire Detection and Fire Alarm Systems for Buildings) and carry out all associated electrical works in accordance with BS 7671 (IET Wiring Regulations).
Our installations are tailored to your property, whether a house, flat, HMO, office or commercial premises, with a focus on safety, compliance and long-term reliability.
Fire Alarm Systems for Residential Properties
Fire alarm systems are essential in residential settings, particularly in flats, HMOs and rental properties.
We install residential fire alarm systems for:
Houses and flats
HMOs and shared accommodation
Landlord and rental properties
New builds and refurbished homes
Typical residential systems include mains-powered, interlinked smoke and heat detectors with battery backup, installed in accordance with BS 5839-6 to provide effective protection throughout the property.
Fire Alarm Systems for Commercial Properties
Commercial premises require fire alarm systems designed to suit the level of risk and occupancy.
We install fire alarm systems for:
Offices
Shops and retail units
Restaurants and cafés
Warehouses and commercial buildings
Commercial systems are designed and installed in line with BS 5839-1, and may include control panels, smoke detectors, heat detectors, sounders and manual call points, where required.
When Do You Need a Fire Alarm System Installed or Upgraded?
Our fire alarm installation service can include:
Site assessment and system design
Supply and installation of smoke and heat detectors
Installation of fire alarm control panels (where required)
Interlinking of detection devices
Mains power connection with battery backup
Testing, commissioning and verification
User guidance and handover
All electrical works are carried out in accordance with BS 7671, and fire alarm systems are installed in line with BS 5839 guidance.
Why Choose Us
Qualified and experienced electricians/engineers
Fire alarm systems designed to current British Standards
Professional, tidy and reliable workmanship
Clear advice and transparent pricing
Installations compliant with BS 5839 and BS 7671
Covering London and surrounding areas
Services offered
We provide CCTV installation services across North London, North West London, West London and South West London, including N, NW, W and SW postcode areas.
If your area is not listed below, please contact us to confirm availability.
- North London: N1 – (Islington, Hoxton), N2 – (East Finchley), N3 – (Finchley Central), N4 – (Finsbury Park), N5 – (Highbury), N6 – (Highgate), N7 – (Holloway), N8 – (Crouch End, Hornsey), N9 – (Lower Edmonton), N10 – (Muswell Hill), N11 – (Friern Barnet, New Southgate), N12 – (North Finchley), N13 – (Palmers Green), N14 – (Southgate), N15 – (Seven Sisters), N16 – (Stoke Newington), N17 – (Tottenham), N18 – (Upper Edmonton), N19 – (Archway, Tufnell Park), N20 – (Whetstone), N21 – (Winchmore Hill), N22 – (Wood Green).
- North West London: NW1 – (Camden, Regent’s Park), NW2 – (Cricklewood, Neasden), NW3 – (Hampstead, Belsize Park), NW4 – (Hendon, Brent Cross), NW5 – Kentish Town, NW6 – (Kilburn, Queen’s Park), NW7 – Mill Hill, NW8 – St John’s Wood, NW9 – (Colindale, Kingsbury), NW10 – (Willesden, Harlesden), NW11 – (Golders Green, Hampstead Garden Suburb).
- West London: W1 – (Mayfair, Soho, Marylebone), W2 – (Paddington, Bayswater), W3 – (Acton), W4 – (Chiswick), W5 – (Ealing), W6 – (Hammersmith), W7 – (Hanwell), W8 – (Kensington), W9 – (Maida Vale, Little Venice), W10 – (Ladbroke Grove, North Kensington), W11 – (Notting Hill), W12 – (Shepherd’s Bush), W13 – (West Ealing), W14 – (West Kensington).
- South West London: SW1 – (Westminster, Victoria), SW2 – (Brixton), SW3 – (Chelsea), SW4 – (Clapham), SW5 – (Earl’s Court), SW6 – (Fulham), SW7 – (South Kensington), SW8 – (Vauxhall), SW9 – (Stockwell), SW10 – (West Brompton), SW11 – (Battersea), SW12 – (Balham), SW13 – (Barnes), SW14 – (Mortlake, East Sheen), SW15 – (Putney, Roehampton), SW16 – (Streatham), SW17 – (Tooting), SW18 – (Wandsworth), SW19 – (Wimbledon), SW20 – (Raynes Park, South Wimbledon).
Frequently Asked Questions (FAQ)
Do residential properties need mains-powered detectors?
Yes. Most residential properties require mains-powered, interlinked smoke and heat detectors with battery backup, particularly rental properties and HMOs.
Can you upgrade an existing fire alarm system?
Yes. We can assess existing systems and recommend upgrades to improve safety and compliance.
Do fire alarm systems need regular testing and maintenance?
Yes. Fire alarm systems should be tested regularly to ensure they operate correctly in an emergency. For residential properties, routine user testing is recommended, while commercial systems typically require periodic inspection and maintenance in line with BS 5839. We can advise on suitable testing and maintenance arrangements.
Are fire alarm systems required for landlords?
Landlords have a legal duty to provide adequate fire detection in rental properties. Flats and HMOs often have additional requirements. A compliant fire alarm system helps meet safety obligations and protects tenants.
What type of fire alarm system is required in a house or flat?
Most residential properties require mains-powered, interlinked smoke and heat detectors with battery backup, installed in line with BS 5839-6. The exact layout depends on the size and type of the property. Although a fire risk assessment needs to be carried out to determine the exact category for the flat or house.
Will I receive certification after the fire alarm installation?
Once the installation is complete, the fire alarm system is tested and commissioned, and the appropriate certification and documentation is provided in line with BS 5839. This confirms the system has been installed correctly and is suitable for the property, which is often required for landlords, managing agents, insurers and commercial premises.
