FindElectrician.co.uk

Light Fitting Repair in London

Our light fitting repair service is for the lights you don't want to throw away: the chandelier that's been in the family for years, the bedside lamp that's stopped working, or the vintage find that needs rewiring before it's safe to use. We repair, rewire and modify them, and we make new lamps and chandeliers to order.

Plenty of faults can be fixed where the light hangs. Bigger jobs, like a full chandelier rewire or a bespoke lamp, come back to our workshop, either collected by us or dropped off by you, and go back tested and ready to use. Any bedside lamp, or any other lamp with a plug, also comes back with a free PAT test sticker, valid for 12 months.

  • NAPIT-accredited
  • Chandeliers and lamps
  • Free quotes
Light fitting repair in London - gold chandelier with glass discs and crystal drops
The service

What our light fitting repair service includes

From a loose bulb holder to a full strip-down, this is the light fitting repair work we do most.

Repairs and fault finding

Lights that flicker, buzz or won't switch on. We find the fault, whether it's the bulb holder, the switch, the flex or a loose connection.

Rewiring old and antique pieces

New flex, bulb holders and switches for vintage lamps and chandeliers, keeping the original look. Fabric-covered flex is available if you want it to look the part.

LED conversions

We swap old holders for LED-friendly ones and fit dimmers that suit LEDs, so you lose the flicker and the buzz.

Modifications

Shortening or lengthening the drop, changing bulb holders, adding a dimmer, or adapting a light to suit a new room.

Chandelier cleaning and crystals

Taking chandeliers down, cleaning them, re-stringing drops, replacing missing or broken crystals and hanging them back up.

Bespoke lamps and chandeliers

We turn vases, bottles and antiques into lamps, and build chandeliers to suit your room.

Done safely

Hung securely, wired properly

A chandelier can weigh a lot more than it looks. Under the wiring regulations, BS 7671, every light fixing has to hold at least 5 kg, and anything heavier needs a fixing that's rated for its weight (Voltimum explains the rule). Before we hang a heavy chandelier, we check what it's fixed to and fit a proper support into the joist if it needs one.

Lamps are a little different, because they plug in. After a light fitting repair or rewire, we test the lamp the same way we'd PAT test any appliance, so you know it's safe before it goes back on your bedside table. Every lamp with a plug gets a free PAT test sticker, valid for 12 months.

5 kgMinimum load a light fixing must hold under BS 7671
Free PATSticker on every plug-in lamp, valid for 12 months
LEDCooler, cheaper to run and no more flicker
Our work

Recent chandelier jobs

A few of the chandeliers we've worked on in homes across London.

Brass sputnik chandelier with opal glass shades, fitted in a London home Pair of tiered glass chandeliers over a dining table in a panelled London dining room Tiered crystal chandelier with a brass band in a London hallway
Who it's for

Light fitting repair for homes and businesses

Our light fitting repair service is for anyone with a light worth saving, from a single bedside lamp to a set of chandeliers.

HomeownersInterior designersAntique and vintage collectorsLandlordsRestaurants and barsHotels
Is it time?

Signs your light needs looking at

It's worth getting it checked if:

  • It flickers, buzzes or only works when you wiggle the switch
  • The flex is cracked, brittle or the fabric is fraying
  • The bulb holder is loose, scorched or discoloured
  • It has a metal body but an old two-core flex with no earth
  • The lamp gets hot near the bulb holder, switch or plug
  • A chandelier arm or crystal has broken or gone missing

If you can smell burning or see scorch marks, unplug the lamp or switch the light off at the fuse board, and don't use it until it's been checked.

Lights flickering? Read our guide on why your lights keep flickering

How it works

Our light fitting repair process

Four simple steps, and you'll know the price before we start.

1

Send us photos

Show us the light, any label on it and what's wrong, and we'll come back with a free quote.

2

On site or workshop

Smaller repairs we do where the light hangs. Bigger jobs come to our workshop, collected by us or dropped off by you.

3

Repair and test

We repair, rewire or modify it, then test it for safety before it goes back.

4

Refit and hand over

We hang or refit it, check it works with your switch or dimmer, and leave everything tidy.

5.0 ratingFrom 85 Google reviews

NAPIT-accreditedMembership No. 65117

On site or in our workshopWhatever suits the job

London-wideNorth, North West, West and South West London

Related

Other ways we can help

Sometimes the problem isn't the light itself but the wiring behind it, so it can make sense to combine a light fitting repair with one of these.

FAQ

Light fitting repair FAQs

Can you repair a chandelier without taking it down?

Often, yes. Plenty of light fitting repair jobs, like a loose connection or a broken bulb holder, can be done where it hangs. A full rewire or a lot of crystal work is easier, and safer, in our workshop.

Can you rewire an antique or vintage lamp?

Yes. We replace the old flex, bulb holder and switch with modern parts and keep the original look as much as we can, including fabric-covered flex if you'd like it.

Can my old chandelier take LED bulbs?

Usually. Sometimes the bulb holders or the dimmer need changing so the LEDs work smoothly without flickering or buzzing. We'll tell you what's needed when we quote.

Can you turn a vase or bottle into a lamp?

Yes. Bring us the piece and tell us the look you're after, and we'll turn it into a lamp with the right holder, flex and switch.

Is my chandelier too heavy for the ceiling?

It might be. Under BS 7671, a light fixing has to hold at least 5 kg, and anything heavier needs a fixing rated for its weight. We check what the ceiling can take and fit a proper support if it needs one.

Will my lamp be PAT tested?

Yes. Every bedside lamp, or any lamp with a plug, that we repair, rewire or make is PAT tested before it goes back, and comes with a free PAT test sticker, valid for 12 months.

Do you clean chandeliers and replace missing crystals?

Yes. We can take it down, clean it, re-string or replace drops and crystals, and hang it back up. We'll match replacement crystals as closely as we can.

Have a light that needs fixing?

Send us a few photos and tell us what's wrong. We'll come back with a free quote for your light fitting repair.

Send us an enquiry

Tell us what you need and roughly where you are, and we’ll get back to you with a free quote, usually within 12 hours. Photos of the light always help.

Rather talk it through? Call us on 07447 569653 or send us a message on WhatsApp.

We’re NAPIT-accredited (No. 65117), and every job comes with the right certificate.