FindElectrician.co.uk

Smoke Alarm Installation in London

Our smoke alarm installation service covers mains-wired smoke, heat and carbon monoxide alarms for homes and rental properties across London. Because we design every system to BS 5839-6, you get the right alarm in the right room, all interlinked so they sound together.

For instance, we work for homeowners, private landlords, letting agents and managing agents. In addition, we hold the BS 5839-6 qualification, the code of practice for fire alarms in homes, so we can tell you exactly what your property needs.

  • BS 5839-6 qualified
  • Mains-wired and interlinked
  • Landlord rules covered
Smoke alarm installation in London - Find Electrician
The service

What our smoke alarm installation includes

From a single replacement to a full interlinked system, we handle the whole job, including the paperwork.

Mains-wired smoke alarms

First, we fit mains-powered smoke alarms with a sealed backup battery in hallways, landings and living rooms.

Heat alarms for kitchens

We also fit heat alarms in kitchens, because a smoke alarm there would go off every time you cook.

Carbon monoxide alarms

In addition, we fit CO alarms in rooms with a boiler, gas fire or wood burner.

Interlinked systems

Every alarm is linked by cable or radio, so a fire in the kitchen also sets off the alarm upstairs.

Alarm replacement

However, most alarms need replacing after about 10 years, so we swap out old units and check the wiring.

Testing and paperwork

Finally, we test every alarm together and give you the paperwork, which landlords can keep for their records.

The standard

Smoke alarm installation to BS 5839-6

BS 5839-6 is the code of practice for fire alarms in homes. For example, for rented homes, it recommends Grade D1 alarms, which are mains-powered with a sealed backup battery, covering Category LD2: the escape routes plus the rooms where a fire is most likely to start.

In addition, the law sets a minimum for landlords. Under the Smoke and Carbon Monoxide Alarm Regulations, every storey needs a working smoke alarm, and councils can fine landlords up to £5,000 if they do not comply.

D1Mains-powered, and also backed up by a sealed battery
£5,000Maximum fine, for example for landlords who do not comply
LD2Escape routes, as well as high-risk rooms
Your options

Which level of protection do you need?

Choosing the right category is the first step in any smoke alarm installation, because it decides which rooms get an alarm.

LD3: minimum

Alarms in hallways and landings only. However, BS 5839-6 no longer recommends this for rented homes.

LD2: recommended

Escape routes plus high-risk rooms, such as the kitchen and living room. Therefore, it is the usual choice for rented homes.

LD1: maximum

Alarms in every room where a fire could start, except bathrooms. As a result, a fire is detected wherever it begins.

Who we work with

Smoke alarm installation for homes and rentals

Also, we fit alarms in houses and flats of every age, for example Victorian terraces, period conversions and new builds.

HomeownersPrivate landlordsHMO landlordsLetting agentsManaging agentsBuildersLoft conversionsKitchen fitters
Is it time?

When you need new smoke alarms

As a rule, you should book a visit if any of these apply:

  • For example, your alarms are battery-only, or more than 10 years old
  • Also, an alarm keeps chirping, even with a new battery
  • A new tenancy is about to start, because alarms must work on day one
  • In addition, you are planning a loft conversion, extension or rewire
  • Your alarms are not interlinked; therefore, one can sound while the others stay silent
  • Finally, you have a boiler, gas fire or wood burner but no CO alarm

Landlords can also read the official rules in the GOV.UK guidance for landlords and tenants.

Not sure if battery alarms are enough? Then read our guide: do landlords need mains-wired smoke alarms?

How it works

How our smoke alarm installation works

Because we keep it simple, there are just four steps from your first message to working alarms.

1

Tell us about the property

First, tell us how many floors and bedrooms there are, and what alarms you have now.

2

Get a free quote

Next, we recommend the right grade and category and send you a fixed, no-obligation quote.

3

Install and interlink

Then, we fit and wire the alarms and link them together, with as little mess as possible.

4

Test and hand over

Finally, we test every alarm together and also hand over the paperwork.

5.0 ratingFrom 85 Google reviews

NAPIT-accreditedMembership No. 65117

BS 5839-6 qualifiedFire alarm design and installation for homes

London-wideNorth, North West, West and South West London

Related services

Other services you might need

In addition, many customers book one of these alongside new alarms.

FAQ

Smoke alarm installation FAQs

How much does smoke alarm installation cost?

It depends on how many alarms you need and whether wiring is already in place. Therefore, we give you a free fixed quote after a quick survey or a few photos.

Do landlords need mains-wired smoke alarms?

The law only requires a working smoke alarm on every storey, so battery alarms can be legal. However, BS 5839-6 recommends mains-wired Grade D1 alarms for all rented homes, and their sealed batteries cannot be removed by tenants.

What is the difference between a smoke alarm and a heat alarm?

A smoke alarm detects smoke, while a heat alarm reacts to a rise in temperature. As a result, heat alarms suit kitchens, where cooking would set off a smoke alarm.

Where should smoke alarms go?

In the hallway and landing on every floor, plus the living room for Category LD2. However, kitchens get a heat alarm instead, and alarms should never go in bathrooms.

How often should smoke alarms be tested?

BS 5839-6 recommends testing them once a month by pressing the test button. In addition, most alarms need replacing every 10 years.

Can you add a carbon monoxide alarm to the system?

Yes, if the manufacturer allows it, mains-powered CO alarms can be interlinked with your smoke and heat alarms, so every alarm sounds together.

Need smoke alarms fitted?

First, tell us about your property. Then, we will send you a free, no-obligation quote for your smoke alarm installation.

Book a smoke alarm installation with us

Tell us what you need and roughly where you are, and we’ll get back to you with a free quote, usually within 12 hours. Photos of the job always help.

Rather talk it through? Call us on 07447 569653 or send us a message on WhatsApp.

We’re NAPIT-accredited (No. 65117), and every job comes with the right certificate.