FindElectrician.co.uk

Socket Not Working but Nothing’s Tripped? What to Check

Fully fitted kitchen with lighting under cabinets - FindElectrician
The short answer

Why is my socket not working when nothing has tripped?

Socket not working, but nothing has tripped at the consumer unit? It’s one of the most common calls we get, and usually the cause is something simple, such as a blown fuse in the plug or a fused spur that’s been switched off. However, it can also be a loose connection, either behind the socket itself or at another socket further along the circuit.

Breakers and RCDs only trip when they detect too much current or a leak to earth. A connection that has simply come loose breaks the circuit without causing either, so nothing trips and the socket just goes dead. This guide shows you how to narrow it down safely and when to call us.

Socket not working diagnosis: one appliance, one socket or several sockets
Socket inspector

Tap the socket to see what to check

Each numbered point shows a common reason a socket stops working, and whether it’s safe to check yourself.

Wiring behind the socket1234
Safe to check1. The switch

Make sure the socket is switched on. Switches wear out, so if it feels loose or doesn’t click, the socket needs replacing.

Look, don’t touch2. The faceplate

Look for brown or black marks, cracks or melting, and notice if it feels warm. Any of these mean overheating, so switch it off and stop using it.

Safe to check3. The plug fuse

Try the appliance in another socket. If it doesn’t work anywhere, replace the plug fuse with one of the same rating.

Electrician only4. Behind the socket

A loose or burnt terminal behind the faceplate is a common cause when nothing has tripped. Don’t unscrew the socket yourself, because the terminals are live.

Quick diagnosis

Socket not working? Work through it in this order

Answer each question in turn. Most dead sockets are found by step 3.

1
Does another appliance work in it?

If it does, the problem is your appliance or its plug fuse. If nothing works, move on to the next step.

2
Is the socket switched on?

Check the switch on the socket itself and any fused spur nearby, which is often above the kitchen worktop.

3
Has anything tripped or blown?

Look at every breaker, RCD and RCBO in the consumer unit. In an old fuse box, check for a blown fuse carrier.

4
Are other sockets dead too?

If several sockets are dead, the fault is usually a loose connection further up the circuit.

5
Is there heat, scorching or a burning smell?

If so, switch that circuit off at the consumer unit and call an electrician straight away.

Socket still dead after these checks? Our electricians can trace the fault and put it right.

The causes

Six reasons for a socket not working without tripping

In our experience, most dead sockets come down to one of these.

A blown plug fuse

For a start, every UK plug has its own fuse, usually 3A or 13A. If it blows, the appliance stops working even though the socket is fine, so always try a different appliance first.

A switched-off fused spur

In many homes, kitchen appliances, boilers and heaters run from a fused spur with its own switch and fuse. If that switch is off or the fuse has blown, the socket or appliance it feeds goes dead.

A loose or burnt terminal

A cable that has worked loose behind the socket breaks the circuit without tripping anything. Look for scorch marks, a warm faceplate or a burning smell, because that means it’s overheating.

A fault further up the circuit

Sockets are wired one after another. Therefore, a loose connection at one socket can leave the next ones on the circuit dead, even though they look perfectly fine.

An old fuse box

Older fuse boxes use rewireable or cartridge fuses instead of breakers. A blown fuse doesn’t “trip”, so it’s easy to miss when you check the board.

A worn or faulty socket

Over time, sockets wear out. For instance, loose contacts that no longer grip the plug, a cracked faceplate or failed USB ports all mean the socket needs replacing.

Why nothing trips

Why a dead socket doesn’t always trip the electrics

A breaker trips when too much current flows, for example from a short circuit or an overload. An RCD trips when current leaks to earth. However, a loose connection simply breaks the circuit, so no extra current flows and neither device has anything to react to.

That’s why a socket not working with no trip is worth taking seriously. If you’ve had tripping as well, read our guide on why your RCD keeps tripping.

Safety first

When a dead socket becomes dangerous

A loose connection that’s only partly broken can arc, and arcing creates heat. Over time, that heat can melt the socket, scorch the wall and, in the worst cases, start a fire.

So if you notice a burning smell, scorch marks, crackling or a socket that feels warm, switch off that circuit at the consumer unit, stop using the socket and call an emergency electrician.

Electrician’s tip

Before you call us, take a photo of your consumer unit or fuse box. It tells us straight away whether you have modern RCBOs, an older split-load board or rewireable fuses, which makes finding the fault quicker and cheaper.

How we fix it

How an electrician fixes a socket not working

Dead sockets are usually quick to find, because we follow the same three steps every time.

We map the circuit

We check which sockets are dead and which still work, which tells us roughly where the break is.

We test and trace

Then we test each socket on the circuit to find the loose or burnt connection, rather than guessing.

We repair and re-test

Finally, we re-terminate or replace whatever is at fault and test the whole circuit, so you know it’s safe.

FAQ

Socket not working: FAQs

Why is my plug not working but the breaker hasn’t tripped?

Most often it’s the fuse in the plug or the appliance itself. If a different appliance works in that socket, check the plug fuse. If nothing works in it, the socket or its wiring is at fault.

What causes no power to sockets without tripping the electrics?

Usually a loose connection, either behind a socket or at another socket on the same circuit. In older homes, it can also be a blown fuse in a rewireable fuse box, which doesn’t trip like a breaker.

Is a socket not working a fire risk?

Not always. However, if the socket is warm, scorched, crackling or smells of burning, a loose connection may be overheating. Switch the circuit off and call an electrician straight away.

Why is more than one socket not working?

Sockets on the same circuit are linked, so one loose connection can cut power to the sockets after it. As a result, the faulty one is often a socket that still looks normal.

Can I replace a broken socket myself?

In England, replacing a socket like for like isn’t notifiable building work, but it still has to meet BS 7671. In addition, if the socket died because of a wiring fault, a new faceplate won’t fix it, so we recommend using an electrician.

How much does it cost to fix a socket that isn’t working?

It depends on the cause. For example, replacing a faulty socket is a quick job, while tracing a loose connection along a circuit takes longer. Send us a WhatsApp describing the problem and we’ll give you a free quote.

Still got a socket not working?

Our electricians find dead sockets and loose connections quickly, and we’re available 24/7 if anything looks scorched or smells of burning. See our emergency electrician service, or message us for a free quote.

Talk to us

Speak to a London electrician today

Call, email or WhatsApp us for a free quote. For emergencies, we answer 24/7.

Get a free quote from a London electrician

Tell us what you need and roughly where you are, and we’ll get back to you with a free quote, usually within 12 hours. Photos of the job always help.

Rather talk it through? Call us on 07447 569653 or send us a message on WhatsApp.

We’re NAPIT-accredited (No. 65117), and every job comes with the right certificate.